HP XP P9500 Storage - Manual (Page 576)

Message ID Message Text Explanation
utility for setting HDLM driver option
(dlmsetopt).
Delete any unnecessary files in the
file system, and then re-execute the
dlmsetopt utility.
KAPL12564-E An attempt to back up a file
has failed. File name =
aa...aa
Details
aa...aa: Backup file name
Action
Make sure there is enough free disk
capacity, and then re-execute the
utility for setting HDLM driver option
(dlmsetopt).
KAPL12565-E Could not modify file. File
name = aa...aa
Details
aa...aa: Name of file to be updated
Action
Make sure there is enough free disk
capacity, and then re-execute the
utility for setting HDLM driver option
(dlmsetopt). If this message still
appears, stop any unnecessary
processes, and then re-execute the
dlmsetopt utility.
KAPL12566-E The utility for setting HDLM
driver option was executed
and ended abnormally last
time.
Action
Compare the contents of the /etc/
modprobe.conf file and the /etc/
opt/DynamicLinkManager/
DLMSETOPT/modprobe.conf file.
According to the result, perform the
following procedures:
The /etc/opt/DynamicLinkManager/
DLMSETOPT/modprobe.conf file was
copied for backup by HDLM before
the utility for setting HDLM driver
option (dlmsetopt) is to be executed.
If Red Hat Enterprise Linux 6 is being
used, /etc/modprobe.conf must be
read as /etc/modprobe.d/
dlmdrvopt.conf.
¢
When the file contents match:
Delete the /etc/opt/
DynamicLinkManager/
DLMSETOPT/modprobe.conf file.
Then, re-execute the dlmsetopt
utility to make sure that an error
does not occur.
¢
When the file contents do not
match:
Overwrite the /etc/
modprobe.conf file with the /
etc/opt/DynamicLinkManager/
8-116
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))