HP XP P9500 Storage - Manual (Page 365)

The following example shows how to place a path, whose
AutoPATH_ID is 000002, online without asking for confirmation of
command execution from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr online -pathid 2 -s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
To Display the Format of the Online Operation
-help
Displays the format of the online operation.
Example
The following example shows how to display the format of the online
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr online -help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path] -hba HBAPortNumber.BusNumber [-s]
dlnkmgr online [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr online [-path] [-pathid AutoPATH_ID] [-s]
dlnkmgr online [-path] [-device SCSI_Device_Name] [-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
KAPL01001-I The HDLM command completed normally. Operation
name = online, completion time = yyyy/mm/dd hh:mm:ss
#
Reference
Using the view operation together with standard UNIX commands enables
you to filter the path information listed for a specific HBA port or CHA port.
For details about the view operation, see view (Displays Information) on page
6-28 .
We recommend that you use the following command and verify the
information on the target paths before you execute the online operation to
place online all the paths connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on
all paths that pass through the HBA port whose host port number is 0004
and bus number is 0000:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep 0004.0000
The above command will display information on all the paths that pass
through the specified HBA port.
Command Reference
6-13
Hitachi Dynamic Link Manager User Guide (for Linux(R))