HP XP P9500 Storage User Manual
Page 389
-iem
Use this parameter to add IEP to path information and display
information about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
•
pn: Path name
•
lu: LU number of the storage system
•
cp: Port number of the CHA
When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-hbaportwwn
Displays port WWN information for the HBAs connected to the storage
system.
-t
Omits the title for each information item.
Example
The following example shows how to display information about the
paths that access a host device whose name is sddlmaa.
To display path information, by selecting a display item
-path -item
When you specify the -path parameter together with the -item
parameter, the command only displays the items specified by the value of
the -item parameter.
When the value of the -item parameter is omitted, only the PathID and
the Status fields are displayed.
Table 6-11 Correspondence between the items displayed by the dlnkmgr
view -path -item command and the values of the -item parameter on
shows the correspondence between the items that can be
Command Reference
6-37
Hitachi Dynamic Link Manager User Guide (for Linux(R))