HP XP P9500 Storage - Manual (Page 378)

-category [[ss] [a] [ca]|all]
Specifies the categories of audit log data to be collected. Table 6-8
Values Indicating Audit Log Data Categories on page 6-26 describes
the values that indicate categories of audit log data. The default is
all. If you specify the -category parameter without specifying a
value, all is assumed.
Table 6-8 Values Indicating Audit Log Data Categories
Value Explanation
ss Audit log events of the StartStop category are collected.
a Audit log events of the Authentication category are collected.
ca Audit log events of the ConfigurationAccess category are
collected.
all Audit log events of the StartStop, Authentication, and
ConfigurationAccess categories are collected.
-audfac facility-value
Specifies the audit log facility.
Table 6-9 Values of the Audit Log Facility on page 6-26 describes the
values of the audit log facility. The default is user.
Table 6-9 Values of the Audit Log Facility
Value Corresponding facility value in the /etc/syslog.conf file
user or 1 user
local0 or 16 local0
local1 or 17 local1
local2 or 18 local2
local3 or 19 local3
local4 or 20 local4
local5 or 21 local5
local6 or 22 local6
local7 or 23 local7
-lbpathusetimes number-of-path-use-times
Specifies the number of times the same path can be used for I/O
operations when the Round Robin (rr), Least I/Os (lio), or Least Blocks
(lbk) algorithm is used for load balancing.
You can specify a decimal (base 10) value from 0 to 999999. The default
is 32.
If you specify 0, operation is the same as when load balancing is disabled.
6-26
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))