HP XP P9500 Storage - Manual (Page 15)

Chapter Description
HDLM manager. This chapter also describes how to
configure an environment to properly operate HDLM,
such as changing the HDLM management-target
devices that connect paths or replacing the hardware
that makes up a path.
5 Troubleshooting on page 5-1 Explains how to troubleshoot a path error, HDLM
failure, or any other problems that you might
encounter.
6 Command Reference on page
6-1
Describes all the HDLM commands.
7 Utility Reference on page 7-1 Describes the HDLM utilities.
8 Messages on page 8-1 Provides information for all the possible messages that
could be output by HDLM. It also lists and explains the
HDLM messages and shows the actions to be taken in
response to each message.
A Notes on Linux Commands and
Files on page A-1
Gives notes on Linux commands and files.
B Troubleshooting Products That
Use the Weak-Modules Script on
page B-1
Explains how to deal with errors that are caused by
installing or uninstalling products that use the weak-
modules script.
C Functional Differences
Between Versions of HDLM on
page C-1
Explains the differences in functionality between HDLM
versions.
Referenced documents
The following Hitachi referenced documents can be found on the applicable
Hitachi documentation CD:
• Hitachi Command Suite Global Link Manager Installation and
Configuration Guide, MK-95HC107
• Hitachi Command Suite Global Link Manager Messages, MK-95HC108
• Hitachi Adaptable Modular Storage Series User's Guide
• Hitachi Simple Modular Storage Series User's Guide
• Hitachi USP Series User's Guide
• Hitachi Workgroup Modular Storage Series User's Guide
• Thunder9580V Series Disk Array Subsystem User's Guide
• Universal Storage Platform V Series User's Guide
• Universal Storage Platform VM Series User's Guide
• Virtual Storage Platform Series User's Guide
• HITACHI Gigabit Fibre Channel Board User's Guide
• ServerConductor/DeploymentManager User's Guide
Preface
xv
Hitachi Dynamic Link Manager User Guide (for Linux(R))