HP XP P9500 Storage - Manual (Page 548)

Message ID Message Text Explanation
a
.
Execute the following
command to load the HDLM
driver
# /opt/
DynamicLinkManager/bin/
dlminsadrv
# modprobe sddlmfdrv
b
.
Re-execute the dlmcfgmgr
utility.
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility
for Managing the HDLM
Configuration on page 7-22 .
KAPL10351-E The specified HDLM-
configuration definition utility is
invalid. Operation name =
aa...aa, Parameter = bb...bb
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
specified operation name
(aa...aa:) or parameter (bb...bb)
was invalid.
aa...aa: Operation name
bb...bb: Parameter
Action
Confirm that the operation name
and parameter are correct, and
then re-execute the dlmcfgmgr
utility. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10352-W The HDLM device is in use.
HDLM device = aa...aa. Stop the
application using the HDLM
device, unmount the HDLM
device being mounted, and then
execute the dlmcfgmgr utility
again.
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
specified HDLM device (aa...aa)
was using it.
aa...aa: HDLM device name
Action
Stop the application using the
HDLM device, unmount the HDLM
device being mounted, and then
re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22 .
KAPL10353-W An error occurred while a
backup of the HDLM files was
being acquired. File name =
aa...aa. Execute the DLMgetras
Details
An error occurred during
acquisition of the HDLM file
(aa...aa) backup.
8-88
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))