HP XP P9500 Storage - Manual (Page 209)

¢
When ELILO is the boot loader
Specify label for default.
15
.
Shut down the host.
Execute the following command to shut down the host:
# shutdown -h now
16
.
Change the configuration from a multi-path configuration to a single-path
configuration.
17
.
Start the host.
18
.
Execute the mount command to check that the SCSI device is mounted
in /boot.
The following shows an execution example for when GRUB is used as the
boot loader:
# mount
:
:
/dev/sda1 on /boot type ext3 (rw)
:
:
Check the underlined section.
19
.
Update the information about the volume group.
Execute the following command to update the information about the
volume group.
# vgscan
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
20
.
Check the relationship between the volume group and HDLM devices.
Execute the following command to make sure that the physical volumes
that make up the volume group are not HDLM devices.
Creating an HDLM Environment
3-141
Hitachi Dynamic Link Manager User Guide (for Linux(R))