HP XP P9500 Storage - Manual (Page 197)

a
.
Change hdlm_dracut=n defined in the /etc/opt/
DynamicLinkManager/hdlm.conf file to hdlm_dracut=y.
b
.
Execute the dracut command.
The following shows an example of executing the command:
# /sbin/dracut /boot/initramfs-hdlm-2.6.32-71.el6.i686.img
`uname -r`
¢
For OSs other than the above:
Execute the utility for supporting a boot disk (dlmmkinitrd).
For details on the dlmmkinitrd utility, see
dlmmkinitrd Utility for
Supporting a Boot Disk on page 7-31 .
The following examples show how to execute the dlmmkinitrd utility
when you are using Red Hat Enterprise Linux AS4/ES4 or Red Hat
Enterprise Linux 5:
Example of executing the dlmmkinitrd utility when GRUB as the boot
loader is used
# /opt/DynamicLinkManager/bin/dlmmkinitrd /boot/initrd-
hdlm-2.6.9-11.EL.gz `uname -r`
KAPL12329-I The utility for supporting the boot disk
started.
KAPL12344-I A compressed initial ramdisk image /boot/
initrd-hdlm-2.6.9-11.EL.gz was created.
KAPL12330-I The utility for supporting the boot disk
completed.
Example of Executing the dlmmkinitrd utility when IPF (with ELILO as
the boot loader) is used
# /opt/DynamicLinkManager/bin/dlmmkinitrd /boot/efi/efi/
redhat/initrd-hdlm-2.6.9-11.EL.gz `uname -r`
KAPL12329-I The utility for supporting the boot disk
started.
KAPL12344-I A compressed initial ramdisk image /boot/efi/
efi/redhat/initrd-hdlm-2.6.9-11.EL.gz was created.
KAPL12330-I The utility for supporting the boot disk
completed.
The following examples show how to execute the dlmmkinitrd utility
when you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX
Enterprise Server 11:
# /opt/DynamicLinkManager/bin/dlmmkinitrd
KAPL12329-I The utility for supporting the boot disk started.
KAPL12344-I A compressed initial ramdisk image /boot/
initrd-2.6.16.46-0.14-default.hdlm was created.
KAPL12330-I The utility for supporting the boot disk
completed.
14
.
Back up the /etc/fstab file.
Creating an HDLM Environment
3-129
Hitachi Dynamic Link Manager User Guide (for Linux(R))