HP XP P9500 Storage User Manual
Page 376

# /opt/DynamicLinkManager/bin/dlnkmgr set -iem on -intvl 20 -
iemnum 2
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
#
-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
If a license key file is provided:
Store the license key file named hdlm_license directly under /var/
tmp, and then execute the set -lic operation. A message confirming
that the license key has been registered is displayed, depending on
the license key type defined in the license key file. When a temporary
license key or emergency license key has been registered, the
expiration period is displayed (KAPL01071-I, KAPL01072-I).
If a license key is provided:
When the set -lic operation is executed, a message (KAPL01068-I)
asking the user to enter a license key appears. Enter the license key.
A message confirming that the license key has been registered is
displayed, depending on the license key type described in the license
key file. For a temporary license key or emergency license key, the
expiration period is also displayed (KAPL01071-I, KAPL01072-I).
Table 6-6 License Key Types on page 6-24
Table 6-6 License Key Types
Type
Description
Permanent license key
Permanent license keys are valid for using HDLM
permanently.
Temporary license key
#
Temporary license keys are used temporarily, for example,
when a user needs to perform product evaluations.
Temporary license keys are valid for 120 days after the
installation. You cannot reuse a temporary license key.
Emergency license key
Emergency license keys are used temporarily, for example,
when waiting for a permanent license key to be issued.
Emergency license keys are valid for 30 days after they
are entered. You cannot reuse an emergency license key.
#
A temporary license key cannot be installed by using the dlnkmgr
command's set operation.
Example 1
6-24
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))