HP XP P9500 Storage User Manual

Page 166

The following shows an execution example for when media-volume-id

is VOL01234.

# volname /dev/cdrom

VOL01234

Check the version of HDLM.
Execute installux.sh or the HDLM installation utility (installhdlm)

stored on the HDLM DVD-ROM to check the version of HDLM that will be

installed.
The following example shows how to execute the command when the

mount point for the DVD-ROM is /media/cdrom:

When executing installux.sh

# /media/cdrom/installux.sh -v

When executing the installhdlm utility

# /media/cdrom/HDLM_Linux/installhdlm -v

A command execution example is described below. x.x.x-xx is the version

of HDLM.

KAPL09177-I HDLM version: x.x.x-xx

Create an installation information settings file.
Edit the installation information settings file based on your desired

settings. Specify any settings that are not specified in this file after

installing HDLM, as necessary.
To use the sample file, copy it from the DVD-ROM to a directory on the

hard disk. Note that the sample file name can be changed to any name.
The following shows an installation execution example for when the DVD-

ROM mount point is /media/cdrom.

# cp -p /media/cdrom/HDLM_Linux/config/sample_installhdlm.conf /

any-directory/any-file-name

For details about how to edit the installation information settings file,

which is used by the installhdlm utility, see

Perform the installation.
Execute installux.sh or the installhdlm utility stored on the HDLM

DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-

ROM mount point is /media/cdrom.

When executing installux.sh

3-98

Creating an HDLM Environment

Hitachi Dynamic Link Manager User Guide (for Linux(R))

This manual is related to the following products: