HP XP P9500 Storage - Manual (Page 447)

1 to 2,147,483,646: The system retries the specified number of
times.
If the following values are specified, the KAPL12553-W message is
displayed and then processing ends:
• Value of -1 or less
• Value more than 2,147,483,646
• Non-numeric value
-h
Displays the format of the dlmsetopt utility for setting the HDLM driver
option.
Example
Example 1:
In this example, the utility sets the retry count to 100000:
# /opt/DynamicLinkManager/bin/dlmsetopt -r 100000
KAPL12554-I The utility for setting HDLM driver option has
started.
KAPL12555-I The utility for setting HDLM driver option completed
normally.
KAPL12558-I Please restart the computer so that the option
settings take effect.
Example 2:
In this example, the utility displays Help:
# /opt/DynamicLinkManager/bin/dlmsetopt -h
KAPL12554-I The utility for setting HDLM driver option has
started.
Usage: dlmsetopt {-r retrycount | -inqt InquiryTimeout | -inqr
InquiryRetry | -h}
retrycount: -1 = Infinite
0 = No Retry
1-2147483646 = Retry Count
InquiryTimeout: -1 = Default Timeout(30(s))
1-3600 = Inquiry Timeout Value
InquiryRetry: -1 = Default Retry(1)
0 = No Retry
1-2147483646 = Inquiry Retry Count
KAPL12555-I The utility for setting HDLM driver option completed
normally.
Notes:
• The contents specified in the dlmsetopt utility are written to the options
sddlmfdrv line of the conf files. Do not attempt to edit this line using an
editor such as vi. For details on the conf files, see Table 7-8 conf files
used by the dlmsetopt utility on page 7-38 .
Utility Reference
7-37
Hitachi Dynamic Link Manager User Guide (for Linux(R))