HP XP P9500 Storage - Manual (Page 558)

Message ID Message Text Explanation
Action
Execute the dlmcfgmgr utility
with the -logfs parameter
specified. If the error occurs
again, /etc/opt/
DynamicLinkManager/
hdlm_utillog.conf which is not a
regular file might exist. Delete /
etc/opt/DynamicLinkManager/
hdlm_utillog.conf and then
execute the dlmcfgmgr utility
again. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10937-W The maximum number of paths
was exceeded. Revise the
configuration so that the
number of paths is less than, or
the same as, the maximum
number. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
The number of paths in the entire
system exceeded the maximum
number of paths supported in
HDLM. Review and, if necessary,
revise the configuration.
Action
The maximum number of paths
supported in HDLM has been
exceeded. Review and, if
necessary, revise the number of
paths in the entire system. For
details on the number of paths
supported in HDLM, see Number
of Paths Supported in HDLM on
page 3-66 .
KAPL10938-I dlmcfgmgr Log File Size(KB) :
aa...aa
Details
aa...aa: The setup value or default
value of dlmcfgmgr Log File Size.
Action
None.
KAPL10939-W An error occurred during
processing to read a file. File
name = aa...aa
Details
An error occurred during
processing to read a file.
aa...aa: File name
Action
Follow the instructions in the
message that was output before
this message.
KAPL10940-W The maximum wait time has
been reached. Maximum wait
time = aa...aa, Checking
interval = bb...bb
Details
The maximum wait time has been
reached.
aa...aa: Maximum wait time
bb...bb: Checking interval
8-98
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))