HP XP P9500 Storage - Manual (Page 117)

Cluster Software Supported by HDLM (If an FC-SAN Is Used)
When you use HDLM in a cluster configuration, you must install the same
version of HDLM on all the nodes that comprise the cluster. If different
versions of HDLM are installed, the cluster system may not operate correctly.
If the HDLM Version and Service Pack Version, which are displayed by
executing the following command, are the same, the versions of HDLM are
the same:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
Use RHCM to build a cluster configuration.
Volume Managers Supported by HDLM
Table 3-28 Volume Managers When Using Red Hat Enterprise Linux 6 on page
3-49 lists and describes the related programs when using a volume manager.
Table 3-28 Volume Managers When Using Red Hat Enterprise Linux 6
Kernel architecture Kernel Volume manager
IA32 2.6.32-71.el6.i686 LVM2.02.72-8.el6
2.6.32-131.0.15.el6.i686 LVM2.02.83-3.el6
EM64T/AMD64 2.6.32-71.el6.x86_64 LVM2.02.72-8.el6
2.6.32-131.0.15.el6.x86_6
4
LVM2.02.83-3.el6
File Systems Supported by HDLM
Table 3-29 Supported File Systems When Using Red Hat Enterprise Linux 6
on page 3-49 lists and describes the related programs when using the file
system.
Table 3-29 Supported File Systems When Using Red Hat Enterprise Linux 6
Kernel architecture Kernel File system
IA32 2.6.32-71.el6.i686 ext2 (supplied with the OS)
ext3 (supplied with the OS)
ext4 (supplied with the OS)
GFS2 (supplied with the OS)
#
2.6.32-131.0.15.el6.i686
EM64T/AMD64 2.6.32-71.el6.x86_64
2.6.32-131.0.15.el6.x86_64
#
An HDLM device on a GFS2 file system cannot be used as a boot disk.
Creating an HDLM Environment
3-49
Hitachi Dynamic Link Manager User Guide (for Linux(R))