HP XP P9500 Storage User Manual

Page 237

When you use the parted command to change the partition, to let the

system recognize the partitions on the HDLM device, execute the
blockdev command after the parted command.

Edit the /etc/lvm/lvm.conf file.
Edit the device section in the file as shown below to disable the SCSI

device configuration and enable the HDLM device configuration:

Adding and deleting filter entry information
Add the following line and comment out all other filter entry

information:
filter = [ "a|sddlm[a-p][a-p].*|", "r|/dev/sd|" ]

Adding types entry information
Add the following line:
types = [ "sddlmfdrv", 16 ]
Make sure that types=[ "fd", 16 ] was commented out.

shows an example of editing the file when the OS is SUSE LINUX

Enterprise Server 9. The shaded section shows the portion to be edited.

Creating an HDLM Environment

3-169

Hitachi Dynamic Link Manager User Guide (for Linux(R))

This manual is related to the following products: