HP XP P9500 Storage - Manual (Page 574)

Message ID Message Text Explanation
The collection of files for HDLM
completed.
Action
None.
KAPL12551-E The utility for setting HDLM
driver option can be
executed with the name
dlmsetopt only.
Action
Change the utility name back to
dlmsetopt, and then execute it.
KAPL12552-E Multiple instances of the
utility for setting HDLM
driver option (dlmsetopt)
cannot execute concurrently.
Action
Wait until the executing utility
finishes, and then re-execute
dlmsetopt.
If two or more utilities are not
executing simultaneously, delete the
following files, and then re-execute
the utility:
/etc/opt/
DynamicLinkManager/.dlm_modules
.conf.lock
KAPL12553-W Usage: /opt/
DynamicLinkManager/bin/
dlmsetopt {-r retrycount | -
inqt InquiryTimeout | -inqr
InquiryRetry | -h}
Action
Refer to dlmsetopt Utility for Setting
HDLM Driver Options on page 7-35 ,
and then specifying the correct
argument. Then, re-execute the
dlmsetopt utility.
KAPL12554-I The utility for setting HDLM
driver option has started.
Action
None.
KAPL12555-I The utility for setting HDLM
driver option completed
normally.
Action
None.
KAPL12556-I An attempt to execute the
utility for setting HDLM
driver option has failed.
Action
Check the action recommended in the
error message output before this
message, and take action
accordingly.
KAPL12557-I The user stopped the utility
for setting HDLM driver
option.
Details
Even if the message KAPL12555-I is
output before this message, the
contents set by the execution of the
dlmsetopt utility will have no effect
and the settings will return to the
state before the execution.
Action
If necessary, re-execute the
dlmsetopt utility.
8-114
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))