HP XP P9500 Storage - Manual (Page 186)

:
:
title XEN
root (hd0,1)
kernel /boot/xen.gz
module /boot/vmlinuz-2.6.16.60-0.21-xen vga=0x31a
splash=silent showopts
module /boot/initrd-2.6.16.60-0.21-xen.hdlm
¢
When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see
Hosts and OSs
Supported by HDLM on page 3-3 .
:
:
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option
ramdisk_size=18958 option
initrd /initrd-hdlm-2.6.18-194.el5.gz
¢
When LILO or ELILO is used as the boot loader:
:
:
image=/boot/vmlinuz-2.6.18-194.el5
label=HDLM_194.EL
initrd=/boot/initrd-hdlm-2.6.18-194.el5.gz
read-only
append="option ramdisk_size=18958 option"
6
.
Change the name of the configuration contained in the boot loader
configuration file.
Change the name of the configuration that you copied in step 5. You can
assign any name that indicates that the configuration is used for
specifying the SCSI device.
¢
When GRUB is used as the boot loader:
Change the underlined text as follows:
Before:
title Red Hat Enterprise Linux (2.6.18-194.el5)
After:
title sd-Red Hat Enterprise Linux (2.6.18-194.el5)
¢
When LILO or ELILO is used as the boot loader:
Change the underlined text as follows:
Before:
label=HDLM_194.EL
After:
label=sd-HDLM_194.EL
7
.
Specify the SCSI device you checked in step 3 for root in the boot loader
configuration file.
3-118
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))