HP XP P9500 Storage - Manual (Page 456)

Key name #1 Description #2
Necessity of
definition
Maxim
um
numbe
r of
charac
ters
New
installa
tion
Upgrad
e
installa
tion or
re-
installa
tion
You can set a size from 100 to
16000. The default is 1000.
trace_file_number Set the number of trace files
(hdlmtr[1-64].log).
You can set a value from 2 to 64.
The default is 4.
Optional Optional 2
path_health_check Specify one of the following values
to indicate whether to enable or
disable the path health check
function:
on: Enabled (default)
off: Disabled
Optional Optional 3
path_health_check_
interval Specify the interval in minutes at
which the path health check is
performed.
You can specify a check interval
from 1 to 1440. The default is 30.
Optional Optional 4
auto_failback Specify one of the following values
to indicate whether to enable or
disable the automatic failback
function for failed paths:
on: Enabled (default)
off: Disabled
Optional Optional 3
auto_failback_inte
rval Specify the interval in minutes from
the time the previous path status
check finished until the time the
next path status check started.
You can specify a check interval
from 1 to 1440. The default is 1.
Optional Optional 4
intermittent_error
_monitor
#3
Specify one of the following values
to indicate whether to enable or
disable intermittent error
monitoring:
on: Enabled
off: Disabled (default)
Optional Optional 3
intermittent_error
_monitor_interval Specify the interval in minutes that
monitoring for intermittent errors is
performed.
Optional Optional 4
7-46
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))