HP XP P9500 Storage - Manual (Page 122)

Kernel architecture Kernel Volume manager
2.6.16.60-0.85.1-default
2.6.16.60-0.85.1-smp
2.6.16.60-0.85.1-bigsmp
2.6.16.60-0.85.1-xenpae LVM2.02.17-7.30.1
IPF 2.6.16.21-0.8-default LVM2.02.02-11.2
2.6.16.46-0.14-default LVM2.02.17-7.9
2.6.16.60-0.21-default LVM2.02.17-7.19
2.6.16.60-0.54.5-default LVM2.02.17-27.8
2.6.16.60-0.85.1-default LVM2.02.17-7.30.1
EM64T/AMD64 2.6.16.21-0.8-default
2.6.16.21-0.8-smp LVM2.02.02-11.2
2.6.16.46-0.14-default
2.6.16.46-0.14-smp LVM2.02.17-7.9
2.6.16.60-0.21-default
2.6.16.60-0.21-smp
2.6.16.60-0.21-xen LVM2.02.17-7.19
2.6.16.60-0.54.5-default
2.6.16.60-0.54.5-smp
2.6.16.60-0.54.5-xen LVM2.02.17-27.8
2.6.16.60-0.85.1-default
2.6.16.60-0.85.1-smp
2.6.16.60-0.85.1-xen LVM2.02.17-7.30.1
Notes on using a volume manager
Note the following when using a volume manager:
• Although disk partitioning and system backup functions are supported for
disks in a YaST2 system, the combination of YaST2 and LVM is not
supported.
• When you execute an LVM-related command such as pvscan or vgscan, a
CD-ROM IOCTL command might be sent to each device in the OS. The
IOCTL is available only for SCSI devices. You do not need to enter
information for the IOCTL when installing HDLM because HDLM devices
are not SCSI devices. HDLM rejects the IOCTL request and assumes that
the IOCTL processing has failed. The error message (KAPL05023-E) is
output to the syslog, but HDLM operations are not affected.
This message is also output in the following cases, but HDLM operations
are not affected:
¢
You execute the utility for collecting HDLM error information
(DLMgetras).
3-54
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))