HP XP P9500 Storage - Manual (Page 457)

Key name #1 Description #2
Necessity of
definition
Maxim
um
numbe
r of
charac
ters
New
installa
tion
Upgrad
e
installa
tion or
re-
installa
tion
You can specify a check interval
from 1 to 1440. The default is 30.
intermittent_error
_monitor_number Specify the number of times an
error occurs. You can specify a
value from 1 to 99. The default is 3.
Optional Optional 2
Legend:
Optional: If a key and its setting are not specified, the installer uses the
default.
#1
If you are upgrading or re-installing HDLM, the current configuration is
applied for any setting that is not specified.
#2
For details about the functions set by these keys, see set (Sets Up the
Operating Environment) on page 6-14 .
#3
You can specify this key only in the following cases:
¢
For a new installation:
When on is specified for the auto_failback key in the installation
information settings file
¢
For an upgrade installation or re-installation:
When on is specified for the auto_failback key in the installation
information settings file, or when automatic failback is enabled in the
installation pre-settings
The following shows an example of an edited installation information settings
file.
[INSTALLATION_SETTINGS]
licensekeyfile=/var/tmp/hdlm_license
licensekey=/etc/opt/DynamicLinkManager/dlm.lic_key
driver_config=y
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
load_balance_same_path_use_times=32
error_log_level=3
Utility Reference
7-47
Hitachi Dynamic Link Manager User Guide (for Linux(R))