HP XP P9500 Storage - Manual (Page 454)

a
.
License key file (/var/tmp/hdlm_license)
b
.
File containing the license key (/etc/opt/DynamicLinkManager/
dlm.lic_key)
If none of these files exist when you attempt to perform a new
installation, the KAPL09011-E and KAPL09212-E message is output.
If you specify a value for either the licensekey or licensekeyfile key,
the specified file will not be deleted after the installhdlm utility is
executed. If you do not specify a value for either key, the license key file
(/var/tmp/hdlm_license) or the file in which the license key is described
(/etc/opt/DynamicLinkManager/dlm.lic_key) will be deleted after the
installhdlm utility is executed.
#2
When you perform a new installation of HDLM, or when you perform an
upgrade installation while the license is expired, prepare the license key
or the license key file.
[ENVIRONMENT_SETTINGS] section
This section defines HDLM operation information. If this section is omitted,
the installer will use the following values:
• For a new installation, the installer uses the default values of the keys
that are listed in the following Table 7-12 Keys in the
[ENVIRONMENT_SETTINGS] Section on page 7-44 .
• For an upgrade installation or re-installation, the installer uses the old
HDLM setting values.
Table 7-12 Keys in the [ENVIRONMENT_SETTINGS] Section on page 7-44
lists the keys defined in the [ENVIRONMENT_SETTINGS] section.
Table 7-12 Keys in the [ENVIRONMENT_SETTINGS] Section
Key name #1 Description #2
Necessity of
definition
Maxim
um
numbe
r of
charac
ters
New
installa
tion
Upgrad
e
installa
tion or
re-
installa
tion
load_balance Specify one of the following values
to indicate whether to enable or
disable the load balancing function:
on: Enabled (default)
off: Disabled
Optional Optional 3
7-44
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))