HP XP P9500 Storage - Manual (Page 292)

15
.
Make sure that the SCSI device is used by the file system and the swap
partition.
Make sure of the following three things: that the root directory is
associated with the SCSI device, that the SCSI device is mounted, and
that the SCSI device is assigned to the swap partition.
¢
When the boot loader is LILO or GRUB
Figure 3-44 Example of Executing the mount Command When the
Boot Loader Is LILO or GRUB on page 3-224 shows an example of
executing the mount command.
Figure 3-44 Example of Executing the mount Command
When the Boot Loader Is LILO or GRUB
¢
When the boot loader is ELILO running on an IPF host
Figure 3-45 Example of Executing the mount Command When the
Boot Loader Is ELILO on page 3-224 shows an example of executing
the mount command.
Figure 3-45 Example of Executing the mount Command
When the Boot Loader Is ELILO
Refer to the /proc/swaps file to make sure that the specified SCSI device
name is displayed in the Filename column.
Go to step 18.
16
.
Update the information about the volume group.
Execute the following command to update the information about the
volume group.
# vgscan
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
17
.
Check the relationship between the volume group and HDLM devices.
3-224
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))