HP XP P9500 Storage - Manual (Page 367)

Parameters
To Set Up the HDLM Operating Environment
Table 6-2 Default and Recommended Values on page 6-15 shows the
defaults and recommended values for each setting. If you change the value
of the set operation, the new value takes effect immediately.
Table 6-2 Default and Recommended Values
Item name Default value Recommended value
Load balancing on
The Extended Least I/Os
algorithm is used.
on
The recommended algorithm
depends on the operating
environment.
Error log collection
level
3: Collect error information for
the Information level and
higher.
3: Collect error information for
the Information level and higher.
Error log file size 9900 (KB) 9900 (KB)
Number of error
log files
2 2
Trace level 0: Do not output any trace. 0: Do not output any trace.
Trace file size 1000 (KB) 1000 (KB)
Number of trace
files
4 4
Path health
checking
on (Interval is 30 minutes.) on
The recommended checking
interval depends on the operating
environment.
Automatic failback on (Interval is 1 minutes.) The recommended checking
interval depends on the operating
environment.
Intermittent error
monitoring
off off
Collecting audit log
data
off Set on, if you want to collect
audit log data.
Audit log facility user local0 to local7
#
Number of times
the same path can
be used for load
balancing
32 32
-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
Enables or disables load balancing.
on: Enabled
off: Disabled
Command Reference
6-15
Hitachi Dynamic Link Manager User Guide (for Linux(R))