Figure 3-22 example of editing – HP XP P9500 Storage User Manual

Page 215

Figure 3-22 Example of Editing /etc/elilo.conf file

Edit the shaded portion.

Copy the configuration that was used for startup from the HDLM device.

Assign a name to the copied configuration that indicates that the

configuration is used for specifying the HDLM device after update.

If you will use GRUB as the boot loader
Change title.

If you will use ELILO as the boot loader
Change label.

Edit the specification for root written in the boot loader configuration file.
From the following, perform the procedure corresponding to the host OS:

For Red Hat Enterprise Linux 6:
The following procedure shows how to specify a root device name or

UUID for root.
To specify a root device name for root:

Execute the mount command to check the root device name.
Below is an example of executing the command. The underlined

part is the root device name.

# mount

Creating an HDLM Environment

3-147

Hitachi Dynamic Link Manager User Guide (for Linux(R))

This manual is related to the following products:

Hitachi Dynamic Link Manager Software