HP XP P9500 Storage - Manual (Page 357)

#
Example 2
The following example shows how to display the formats of multiple
operations.
# /opt/DynamicLinkManager/bin/dlnkmgr help online offline help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path] -hba HBAPortNumber.BusNumber [-s]
dlnkmgr online [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr online [-path] [-pathid AutoPATH_ID] [-s]
dlnkmgr online [-path] [-device SCSI_Device_Name] [-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber [-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -device SCSI_Device_Name [-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
help:
Format
dlnkmgr help { clear | offline | online | set | view }
KAPL01001-I The HDLM command completed normally. Operation name
= help, completion time = yyyy/mm/dd hh:mm:ss
#
Example 3
The following example shows how to display the operations that can be
specified by the help operation
# /opt/DynamicLinkManager/bin/dlnkmgr help help
help:
Format
dlnkmgr help { clear | offline | online | set | view }
KAPL01001-I The HDLM command completed normally. Operation name
= help, completion time = yyyy/mm/dd hh:mm:ss
#
offline (Places Paths Offline)
The dlnkmgr command's offline operation places online paths offline.
Specify the paths to be placed offline by specifying an HBA port, CHA port, or
single path. Instead of specifying a path, you can also specify a SCSI device
name.
There must always be at least one online path accessing each LU.
Command Reference
6-5
Hitachi Dynamic Link Manager User Guide (for Linux(R))