HP Storage Mirroring Software - Manual (Page 93)

91 of 739
Data workload failover
When you established your data workload protection, you only protected the data. You
still need to establish failover monitoring, so that the target can stand in for the source in
the event of a source failure, and your end users can access the data from the target.
●
Configuring failover monitoring
●
Updating shares on the target
●
Editing failover monitoring configuration
●
Removing failover monitoring configuration
Configuring failover monitoring
1. Open the Failover Control Center from your target server or a client machine. Do
not run the Failover Control Center from your source server.
2. Select a failover target from the Target Machine list box.
Note:
If the target you need is not listed, click Add Target and manually enter a
name or IP address (with or without a port number). You can also select
the Browse button to search for a target machine name. Click OK to
select the target machine and return to the Failover Control Center main
window.
3. Click Login to login to the selected target.
4. Select a source machine to monitor by clicking Add Monitor. The Insert Source
Machine dialog box appears in front of the Monitor Settings dialog box.
5. On the Insert Source Machine dialog, specify your source machine by any of the
following methods.
●
Type the name of the machine that you want to monitor in Machine Name(s)
and click OK.