HP Storage Mirroring Software - Manual (Page 434)

432 of 739
ID Message Description
broken, and then manually reestablish the connection in
the Replication Console.
79
Memory freed to
bring Double-Take
memory usage
below the limit
Data in the source queue has been sent to the target
machine, bringing the pagefile below its limit.
80
Trying to auto-
retransmit to
ip://xxx.xxx.xxx.xxx
Storage Mirroring Recover is attempting to automatically
reconnect previously established source and target
connections after a server reboot or auto-disconnect.
This is also referred to as the auto-reconnect process.
81
Schedule transmit
start to target
A scheduled transmission of data from a source machine
to a target machine has started. See the description in
the Message column in the log file.
82
Schedule transmit
end to target
A scheduled transmission of data from a source machine
to a target machine has ended. See the description in the
Message column in the log file.
85
repset has been
auto-disconnected
Storage Mirroring Recover automatically disconnects the
source and target connection because the queue size
has reached a specified size for this action.
87
Start replication on
connection con_id Data has started replicating from a source machine to a
target machine.
88
Stop replication on
connection con_id Data has stopped replicating from a source machine to a
target machine.
89
Mirror started con_
id Data is being mirrored from a source machine to a target
machine.
90
Mirror stopped con
_id
The process of mirroring data from a source machine to a
target machine has stopped due to user intervention or
an auto-disconnect. (This means the mirroring process
was not completed.)
91
Mirror paused con
_id
The process of mirroring data from a source machine to a
target machine has paused because the target machine
cannot write the data to disk fast enough. Storage
Mirroring Recover will resolve this issue on its own by