HP Storage Mirroring Software - Manual (Page 246)

244 of 739
●
BlackBerry Controller
●
BlackBerry Dispatcher
●
BlackBerry MDS Connection Service (if installed)
●
BlackBerry MDS Services - Apache Tomcat Service (if installed)
●
BlackBerry Policy Service
●
BlackBerry Router
●
BlackBerry Synchronization Service
7. Install Storage Mirroring Recover on the source and target servers using the
installation defaults.
8. Launch the BlackBerry Server protection workflow .
9. Select a domain .
10. Select source and target servers .
11. (Optional) Configure protection settings .
12. Validate the configuration .
To protect your BlackBerry server, you will complete the following steps:
1. Enable protection .
2. Monitor protection status .
In the event of a failure, you will need to perform some additional tasks. These tasks are
described in
Failover, Failback, and Restoration .
Next step: Launch BlackBerry protection workflow
Launch the BlackBerry protection workflow
Launch the Storage Mirroring Recover Application Manager by selecting Start,
Programs, HP Storage Mirroring, Recover, Storage Mirroring Recover Application
Manager.
To protect a BlackBerry server, on the Tasks area on the left pane, select Protect
BlackBerry Server. The Manage BlackBerry page will appear in the right pane. Make
sure that the Setup tab is in view.
Note:
You can also launch Application Manager for BlackBerry by using the
command line /blackberry option (dtam /blackberry).