HP Storage Mirroring Software - Manual (Page 739)

737 of 739
6. Double-click on any of the validation items to see details. You must correct any
errors before you can enable protection. Depending on the error, you may be able
to click Fix or Fix All and let Storage Mirroring Recover correct the problem for you.
For those errors that Storage Mirroring Recover cannot correct automatically, you
will need to modify the target to correct the error, or you can select a different target.
You must revalidate the selected servers until the validation check passes without
errors.
7. Once the validation check passes without errors, click Enable Protection to begin
monitoring.
2. Monitoring the activity and completion of the initial mirror
After you have enabled full-server protection, you can monitor the protection from the
Full-Server Failover Manager. The Protection Status is displayed in the right center of
the Full-Server Failover Manager. You can tell the status of your protection from this
field.
1. Watch as the mirroring percentage increases. When the mirroring is complete, the
status will change to Enabled.
2. Look at your target and you will see the data from the source.
Once protection is Enabled, if the source should fail, the target can stand-in for the
source.
3. Changing data to cause replication and verifying the data changes
In order to test replication, you need to change the data on your source. This includes