HP Storage Mirroring Software - Manual (Page 319)

317 of 739
●
Microsoft Directory uses port 445 for TCP and UDP communications.
These ports must be open on your firewall. Check your Microsoft documentation if you
need to modify these ports.
Hardware ports
You need to configure your hardware so that the Storage Mirroring Recover and
Microsoft Windows ports are open. Since communication occurs bidirectionally, make
sure you configure both incoming and outgoing traffic.
There are many types of hardware on the market, and each can be configured differently.
See your hardware reference manual for instructions on setting up your particular router.
Starting the protection workflow
If you have not done so already, launch the Storage Mirroring Console .
1. From the Home screen, click the Get Started button. You will be taken to the Get
Started screen.
2. Select Storage Mirroring Recover, then click Next.