HP Storage Mirroring Software - Manual (Page 640)

638 of 739
Managing snapshots
If you have not done so already, launch the Application Manager .
If snapshots were enabled when you configured protection, you can open the Snapshot
Manager to take and delete snapshots.
1. To launch the Snapshot Manager, select Tools, Manage Snapshots.
2. To take an on-the-fly snapshot, click Take Snapshot. A snapshot will begin
immediately.
3. To remove a snapshot, select the snapshot in the list, then click Delete Snapshot.
Note:
In order to fully delete a snapshot, you will need to use the VSAdmin tool. This
tool is available for download from the
Microsoft Download Center .
4. When you are finished, click Close.