HP Storage Mirroring Software - Manual (Page 735)

733 of 739
5. You will be prompted to determine if you want to continue monitoring the source.
Do not make any selections at this time.
6. At this time, you would connect the source to the network. For this evaluation,
reconnect the network cable(s) on the source that you disconnected to simulate the
failure.
7. After the source is online, select Stop in the Failover Control Center to indicate
that you do not want to continue monitoring the source.
At this time, your target is back to its original identity and the source is back online.
11. Restoring your data
The Replication Console provides an easy method for restoring replicated data from the
target back to the original source or to a new source server. You are only required to
input the original source, the target, and the name of the replication set you want to
restore. Storage Mirroring Recover handles the rest, including selecting the files in the
replication set and restoring them to the correct location.
1. From the Replication Console , select Tools, Restoration Manager.