HP Storage Mirroring Software - Manual (Page 708)

706 of 739
To configure access to the SMTP mail server to use for e-mail notification, click the Set
up e-mail server button in the left pane. The Set up e-mail server window will appear.
Note:
You should set up the e-mail server before creating a protection. Otherwise,
you can set up the e-mail server during the protection configuration workflow by
clicking the Configure button on the Configure e-mail notifications window.
For more information, see
Setting e-mail notification options .
The e-mail server configuration will apply to all protection jobs.
Enter the following information that will be used when sending automatic e-mail
notifications.
1. In the From address field, enter the address from which e-mails will be sent.
2. In the SMTP server field, enter the name of the SMTP server to use to send e-mail
notifications.
Note:
You may use any of the following formats for the SMTP server name:
●
Full Active Directory/DNS name (for example,
exch1.domain.local)
●
IP address
●
Netbios short name (for example, exch1)