HP Storage Mirroring Software - Manual (Page 370)

368 of 739
●
You must use a pre-failback and post-failover script. The pre-failback script must
contain the following case-sensitive command, substituting the name of the
IP address resource assigned to the target virtual server.
Cluster resource “IP_Address_Resource_Name” /OFFLINE
The post-failback script must contain the following case-sensitive command,
substituting the name of the group on the target virtual server.
Cluster group “Group_Name” /ONLINE
●
If your target is a cluster, you need to repeat the steps to establish failover
monitoring on all nodes of the cluster, so that any node that could be the owning
node of the target cluster will be monitoring the source.