HP Storage Mirroring Software - Manual (Page 552)

550 of 739
11. Install Storage Mirroring Recover, if necessary.
12. Copy the following files from the target to the Storage Mirroring Recover directory
on the source:
●
exchfailover.exe
●
post_restore__.bat
13. Continue the failback and restoration process.
Rebuilding the original SQL source
1. Verify that your source machine is not connected to the network. If it is, disconnect
it.
2. Resolve the source machine problem that caused the failure.
3. If you must rebuild your hard drive, complete the following.
a. Install Windows. Since your source machine is not connected to the network,
go ahead and use the source’s original name and IP address.
b. Install Storage Mirroring Recover using the installation defaults.
c. Install SQL using the same drive and directory settings as were used on the
original source.
4. Continue the failback and restoration process.
Next step: Fail back