HP Storage Mirroring Software - Manual (Page 605)

603 of 739
Verifying on a schedule
Verification can be scheduled to occur automatically at periodic intervals.
1. Open the Replication Console .
2. Right-click the connection on the right pane of the Replication Console and select
Connection Manager.
3. Select the Verify tab.
4. Specify when you want to start the initial verification. Select the immediate date
and time by clicking Now, or enter a specific Date and Time. The down arrow next
to Date displays a calendar allowing easy selection of any date. Time is formatted
for any AM or PM time.
5. Mark the Reverification Interval check box to repeat the verification process at the
specified interval. Specify an amount of time and choose minutes, hours, or days.
6. Select if you want to Remirror files to the Target automatically. When enabled,
Storage Mirroring Recover will verify the data, generate a verification log, and
remirror to the target any files that are different on the source. If disabled, Storage
Mirroring Recover will verify the data and generate a verification log, but no files
will be remirrored to the target.