HP Storage Mirroring Software User Manual

Page 73

71 of 739

Parameter

Valid Values

available disk space expands

DiskFreeSpaceMin

Any integer representing the amount of disk space, in MB, that
must remain free at all times

DTServiceStartup

●

Y or 1—Start the Storage Mirroring service automatically

●

N or 0—Do not start the Storage Mirroring service
automatically

This parameter is not applied if your DTSetupType is DTCO.

Port

Any integer between 1024 and 65535 that identifies the Windows
Firewall port used for Storage Mirroring Recover.

Set_FWPORT

●

Y or 1—Set the Windows Firewall port for Storage Mirroring
Recover

●

N or 0—Do not set the Windows Firewall port for Storage
Mirroring Recover

Note:

You must have Microsoft .NET installed on server before starting the automatic
installation.

If you are using Windows 2008, but you are not using the built-in administrator
account, Windows 2008 User Access Control will prompt you to confirm you
want to install Storage Mirroring Recover. To work around this issue, use the
built-in administrator account when you are installing to each server. You may
also disable User Access Control if that is acceptable for your environment.

Installing or upgrading automatically to a local machine

1. Create a temporary directory on the server. For example, create c:\temp_install.
2. On the CD, locate the files in a subdirectory under \setup\hpsm that is appropriate

for your architecture, either i386, x64, or IA64. Copy the files from that subdirectory
to the temporary directory.

3. From a command prompt, remove the read-only attributes from the files in the

temporary directory by using the command attrib *.* -r.

4. Make a backup copy of the default DTSetup.ini file in the temporary directory.
5. Edit DTSetup.ini as needed using the values described in the previous table.
6. Determine the exact file name of your setup file by using the command dir setup*.*

from the temporary directory command prompt. Depending on how you received
your software (CD or web), your setup file name will be named setup.exe or setup_