GW Instek GSP-930 Programming Manual - Manual (Page 97)

REMOTE CONTROL
95
Query syntax :CALCulate:TOI:RESult?
Return parameter <3rd lower> 3rd order lower intercept
3 rd order lower pass/fail judgment.
0=pass, 1=fail
<3 rd upper> 3 rd order upper intercept
3 rd order lower pass/fail judgment
0=pass, 1=fail
Example :CALC:TOI:RES?
>-5.5e+1,0, -6.61e+1,0
:CALCulate:TOI:STATe
Set
Query
Description Turns TOI measurement on/off or queries its state.
Syntax :CALCulate:TOI:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:TOI:STATe?
Parameter 0 Turns TOI measurement off.
1 Turns TOI measurement on.
OFF Turns TOI measurement off.
ON Turns TOI measurement on.
Return parameter 0 TOI measurement is off.
1 TOI measurement is on.
Example :CALC:TOI:STAT ON
CONFigure Commands
:CONFigure:MODE .............................................................. 95
:CONFigure:MODE
Set
Query
Description Sets or queries the operating mode, spectrum or
power meter.
Query Syntax :CONFigure:MODE {SA|PMETer}