GW Instek GSP-930 Programming Manual - Manual (Page 114)

GSP-930 Programming Manual
112
:MMEMory:DELete
Set
Description Deletes the designated file from the current
directory.
Syntax :MMEMory:DELete
Parameter
Example :MMEM:DEL quick1.jpg
:MMEMory:DESTination
Set
Description Sets the destination directory for memory related
commands.
When you use a single USB drive/SD card with
multiple partitions inside, the system will
automatically name these partitions in the numeric
order, so you need to specify the partition number.
The same situation applies when you use a USB
hub to extend the number of USB ports. When a
hub is used, all the partitions from all the attached
devices are numbered in numerical order from the
first port to the last port.
If a partition number is not supplied, the system
will default to partition #1. For example:
:MMEM:DEST USB0 = :MMEM:DEST USB)
Syntax :MMEMory:DESTination {LOCAL|USB[]|SD[]}
Parameter LOCAL
USB
SD
Example :MMEM:DEST SD