GW Instek GSP-930 Programming Manual - Manual (Page 126)

GSP-930 Programming Manual
124
Parameter
Return parameter Hz
Example :ACPR: SPAC 2.0e+6
[:SENSe]:ASET:AMPLitude
Set
Query
Description Sets or queries the autoset amplitude floor level.
Syntax [:SENSe]:ASET:AMPLitude
Query Syntax [:SENSe]:ASET:AMPLitude?
Parameter power or voltage
Return parameter
Example :ASET:AMPL 8.0e+1
[:SENSe]:ASET:AMPLitude:AUTO
Set
Query
Description Sets autoset amplitude floor level to auto or
manual or queries its state.
Syntax [:SENSe]:ASET:AMPLitude:AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:ASET:AMPLitude:AUTO?
Parameter 0 Turn autoset amplitude floor to manual.
1 Turn autoset amplitude floor to auto.
OFF Turn autoset amplitude floor to manual.
ON Turn autoset amplitude floor to auto.
Return parameter 0 Autoset amplitude floor is in manual.
1 Autoset amplitude floor is in auto.
Example :ASET:AMPL:AUTO 1
[:SENSe]:ASET:RUN
Set
Description Activates the Autoset function.
Syntax [:SENSe]:ASET:RUN
Example :ASET:RUN