GW Instek GSP-930 Programming Manual - Manual (Page 154)

GSP-930 Programming Manual
152
Query Syntax [:SENSe]:SEMask:OFFSet:STARt:RELative?
Parameter/
Return parameter dBc
offset 1~5
Example SEM:OFFS1:STAR:REL 2.5e+1
[:SENSe]:SEMask:OFFSet:STATe
Set
Query
Description Turns the selected offset on/off or queries its state.
Syntax [:SENSe]:SEMask:OFFSet:STATe {OFF|ON|0|1}
Query Syntax [:SENSe]:SEMask:OFFSet:STATe?
Parameter 0 Turns the selected offset off.
1 Turns the selected offset on.
OFF Turns the selected offset off.
ON Turns the selected offset on.
Return parameter 0 The selected offset is off.
1 The selected offset is on.
Example SEM:OFFS1:STAT 1
[:SENSe]:SEMask:OFFSet:STOP
:ABSolute
Set
Query
Description Sets or queries the amplitude of the stop frequency
of the Absolute Mask for the selected offset.
Syntax [:SENSe]:SEMask:OFFSet:STOP:ABSolute
Query Syntax [:SENSe]:SEMask:OFFSet:STOP:ABSolute?
Parameter/
Return parameter dBm
offset 1~5
Example SEM:OFFS1:STOP:ABS 1.5e+1
[:SENSe]:SEMask:OFFSet:STOP:
ABSolute:COUPle
Set
Query