GW Instek GSP-930 Programming Manual - Manual (Page 41)

REMOTE CONTROL
39
Input:
NR3 +unit type 30 mv
Note: The unit can be omitted.
(Unit defaults to current y-axis
unit).
Return:
3.0e-2
Note: Units = current y axis unit.
trace1
Input:
+ unit
2.3e-6 ms
Unit = ms, ns, ps, ks
Note: The unit can be omitted
(unit defaults to seconds).
Return:
3.0e-2
Note: Units = seconds.
172.16.20.20
Message
Terminator
LF Line feed code (0x0A)