GW Instek GSP-930 Programming Manual - Manual (Page 76)

GSP-930 Programming Manual
74
Return parameter
deviation Frequency deviation in Hz.
rate Modulation rate in Hz.
power Carrier power in the current Y-axis units.
offset Carrier frequency offset in Hz.
sinad Signal to noise and distortion ratio in dB.
Query Example :CALC:DEM:FM:RES:MIN?
>9.840e+1,1.02e+2,-1.12e+1,3.21e+1,1.61e+1
:CALCulate:DEMod:FM:RESult:MAXimum?
Query
Description Returns the maximum recorded measurement
results for FM demodulation as a comma
separated string.
Query Syntax :CALCulate:DEMod:FM:RESult:MAXimum?
Return parameter
deviation Frequency deviation in Hz.
rate Modulation rate in Hz
power Carrier power in the current Y-axis units.
offset Carrier frequency offset in Hz.
sinad Signal to noise and distortion ratio in dB.
Query Example :CALC:DEM:FM:RES:MAX?
>9.840e+1,1.02e+2,-1.12e+1,3.21e+1,1.61e+1
:CALCulate:DEMod:FM:STATe
Set
Query
Description Sets or queries the state of the FM Analysis
function.
Syntax :CALCulate:DEMod:FM:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:DEMod:FM:STATe?
Parameter 0 Turn FM Analysis off.
1 Turn FM Analysis on.
OFF Turn FM Analysis off.
ON Turn FM Analysis on.