GW Instek GSP-930 Programming Manual - Manual (Page 175)

REMOTE CONTROL
173
Return parameter Bit Bit Weight Description
0~2 N/A Not used
3 8 Sweeping
4 16 Measuring
5 32 Wait for Trigger
6~15 N/A Not used
Example :STAT:OPER:COND?
>8
:STATus:OPERation:ENABle
Set
Query
Description Sets or queries the Operation Status Event Enable
register.
Syntax :STATus:OPERation:ENABle
Query Syntax :STATus:OPERation:ENABle?
Return parameter Bit Bit Weight Description
0~2 N/A Not used
3 8 Sweeping
4 16 Measuring
5 32 Wait for Trigger
6~15 N/A Not used
Example :STAT:OPER:ENAB 32
:STATus:OPERation[:EVENt]?
Query
Description Returns the bit weight of the Operation Status
Event register. Reading this register will clear the
event register.
Query Syntax :STATus:OPERation[:EVENt]?