GW Instek GSP-930 Programming Manual - Manual (Page 195)

REMOTE CONTROL
193
UNIT Commands
:UNIT:PMETer:POWer ...................................................... 193
:UNIT:POWer ....................................................................... 193
:UNIT:PMETer:POWer
Set
Query
Description Sets the amplitude unit used for the Power Meter
mode.
Syntax :UNIT:PMETer:POWer {DBM|MW}
Query Syntax :UNIT:PMETer:POWer?
Parameter/
Return parameter DBM Decibels
MW Milliwatts
Example :UNIT:PMET:POW DBM
:UNIT:POWer
Set
Query
Description Sets the amplitude unit used for the Spectrum
mode.
Syntax :UNIT:POWer {DBM|DBMV|DBUV|W|V}
Query Syntax :UNIT:POWer?
Parameter/
Return parameter DBM Decibels
DBMV decibels relative to one millivolt
DBUV decibels relative to one microvolt
W Watt
V Volt
Example :UNIT:POW DBM