GW Instek GSP-930 Programming Manual - Manual (Page 47)

REMOTE CONTROL
45
Operation Status Register
Overview The Operation Status Register Group indicates
the operating status of the GSP-930.
Bit Summary Bit Weight Description
3
8 Sweeping: Indicates that a sweep is in
progress.
4 16 Measuring: The instrument is currently
performing a measurement.
5 32 Waiting for Trigger: The instrument is in
a “wait for trigger” state.
Questionable Status Register
Overview The Questionable Status Register Group
indicates if any limits have been tripped.
Bit Summary Bit Weight Description
5
32 Frequency Status Summary Bit: This is
the summary bit of the Frequency Status
Register.
8 256 Uncal: This bit is set when a signal level
occurs because the sweep is too fast.
9 512 Limit fail: This bit is set to 1 when the
limit line has been violated.
10 1024 ACP Limit Status Summary Bit: This is
the summary bit for the ACP Limit
Status Register.
11 2048 SEM Limit Status Summary Bit: This is
the summary bit for the SEM Limit
Status Register.
12 4096 TOI Limit Status Summary Bit: This is
the summary bit for the TOI Limit
Status Register.
13 8192 Pmet Limit Fail: This bit is set to 1 when
the power meter limit has been violated.