GW Instek GSP-930 Programming Manual - Manual (Page 80)

GSP-930 Programming Manual
78
:CALCulate:LIMit:MARKer
Set
Description Sets the current marker position to a point on a
limit line. The vertical position of the point is the
marker’s vertical position + a user-defined offset.
Syntax :CALCulate:LIMit:MARKer ,
Parameter point 1~10
dB
Seleted limit line
Example :CALC:LIM1:MARK 5, 20
:CALCulate:LIMit:PASS:MODE
Set
Query
Description Sets or queries the Pass/Fail conditions for the
limit line testing.
Syntax :CALCulate:LIMit:PASS:MODE {ALL|MAX|MIN}
Query Syntax :CALCulate:LIMit:PASS:MODE?
Parameter/
Return Parameter ALL All-in.
MAX Max-In
MIN Min-In
Example :CALC:LIM:PASS:MODE ALL
:CALCulate:LIMit:STATe
Set
Query
Description Turns the limit line Pass/Fail test on/off.
Syntax :CALCulate:LIMit:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:LIMit:STATe?
Parameter 0 Pass/Fail test is off.
1 Pass/Fail test is on.
OFF Pass/Fail test is off.
ON Pass/Fail test is on.
Return parameter 0 Pass/Fail test is off.
1 Pass/Fail test is on.