GW Instek GSP-930 Programming Manual - Manual (Page 139)

REMOTE CONTROL
137
[:SENSe]:FREQuency:STARt
Set
Query
Description Sets or queries the start frequency.
Syntax [:SENSe]:FREQuency:STARt
Query Syntax [:SENSe]:FREQuency:STARt?
Parameter
Return parameter Hz
Example FREQ:STAR: 0
[:SENSe]:FREQuency:STOP
Set
Query
Description Sets or queries the stop frequency.
Syntax [:SENSe]:FREQuency:STOP
Query Syntax [:SENSe]:FREQuency:STOP?
Parameter
Return parameter Hz
Example FREQ:STOP: 1.0e+6
[:SENSe]:LIMit:DELete
Set
Description Deletes the chosen limit line.
Syntax [:SENSe]:LIMit:DELete
Parameter limit line number
Example :LIM3:DEL
[:SENSe]:JITTer:OFFSet:STARt
Set
Query
Description Sets or queries the start offset for phase jitter
measurements.
Syntax [:SENSe]:JITTer:OFFSet:STARt