GW Instek GSP-930 Programming Manual - Manual (Page 73)

REMOTE CONTROL
71
Parameter Marker number.
Return parameter in dB.
Example :CALC:DELT1:Y?
>-1.032e+1
:CALCulate:DEMod:AM:RESult:CURRent?
Query
Description Returns the current measurement results for AM
demodulation as a comma separated string.
Query Syntax :CALCulate:DEMod:AM:RESult:CURRent?
Return parameter
depth Modulation depth in %.
rate Modulation rate in Hz.
power Carrier power in the current Y-axis units.
offset Carrier frequency offset in Hz.
sinad Signal to noise and distortion ratio in dB
Query Example :CALC:DEM:AM:RES:CURR?
>9.840e+1,1.02e+2,-1.12e+1,3.21e+1,1.61e+1
:CALCulate:DEMod:AM:RESult:MINimum?
Query
Description Returns the minimum recorded measurement
results for AM demodulation as a comma
separated string.
Query Syntax :CALCulate:DEMod:AM:RESult:MINimum?
Return parameter
depth Modulation depth in %.
rate Modulation rate in Hz.
power Carrier power in the current Y-axis units.
offset Carrier frequency offset in Hz.
sinad Signal to noise and distortion ratio in dB
Query Example :CALC:DEM:AM:RES:MIN?
>9.840e+1,1.02e+2,-1.12e+1,3.21e+1,1.61e+1