GW Instek GSP-930 Programming Manual - Manual (Page 85)

REMOTE CONTROL
83
:CALCulate:MARKer:PEAK:DATA?
Query
Description Returns all the top 10 peak data values in CSV
format (returns the contents of the peak table).
The data contains 10 pairs of data from
the top 10 peaks. Each pair includes the peak
frequency and the peak amplitude. There are a
total of 10 pairs of data points (20 data entries in
total) for the data.
Query syntax :CALCulate:MARKer:PEAK:DATA?
Return parameter pk#1 freq, pk#1 amp,….. pk#10 freq,
pk#10 amp.
Example :CALCulate:MARKer:PEAK:DATA?
>1.250e+08,-5.052e+01,1.065000000e+09,…
:CALCulate:MARKer:PEAK:EXCursion
Set
Query
Description Sets or queries the peak excursion value.
Syntax :CALCulate:MARKer:PEAK:EXCursion
Query Syntax :CALCulate:MARKer:PEAK:EXCursion?
Parameter Peak excursion dB (offset from
threshold)
Return parameter Peak excursion in dB.
Example :CALC:MARK:PEAK:EXC 6 db
:CALCulate:MARKer:PEAK:SORT:TYPE
Set
Query
Description Sets or queries the peak sort type for the peak
table.
Syntax :CALCulate:MARKer:PEAK:SORT:TYPE
{FREQuency|AMPLitude}
Query Syntax :CALCulate:MARKer:PEAK:SORT:TYPE?