GW Instek GSP-930 Programming Manual - Manual (Page 67)

REMOTE CONTROL
65
:CALCulate:ACPR:ACHannel:LOWer?
Query
Description Returns the ACPR (adjacent channel power ratio in
dB) calculated for the selected lower adjacent
channel.
Query Syntax :CALCulate:ACPR:ACHannel:LOWer?
Parameter adjacent channel 1~3
Return parameter Power ratio in dB
Query Example :CALC:ACPR:ACH1:LOW?
>1.801e+01
:CALCulate:ACPR:ACHannel:UPPer?
Query
Description Returns the ACPR (adjacent channel power ratio in
dB) calculated for the selected higher adjacent
channel.
Query Syntax :CALCulate:ACPR:ACHannel:UPPer?
Parameter adjacent channel 1~3
Return parameter Power ratio in dB
Query Example :CALC:ACPR:ACH1:UPP?
>1.921e+01
:CALCulate:ACPR:ACHannel:STATe
Set
Query
Description Sets or queries the state of the selected adjacent
channel.
Syntax :CALCulate:ACPR:ACHannel:STATe {OFF|ON|0|1}
Query Syntax :CALCulate:ACPR:ACHannel:STATe?
Parameter adjacent channel 1~3
0 Disable the selected channel.
1 Enable the selected channel.
OFF Disable the selected channel.